Description:
Reviews:
Works good
Easy to install, I already had the transfer panel and just needed a way to plug in the generator without any hassle. Works great!
A Very Nice part
This is NEMA 3R for outdoor use and one of the few I have seen that the environmental resistance is apparently maintained while connected to the generator. That's important for my home since inclement weather accompanies nearly every outage. This inlet box is the same that has been marketed as a GenTran (now owned by Generac) p/n 14302. It's UL Listed and made of heavy aluminium. It has concentric knock-outs which support 1/2, 3/4 and 1 inch trade-size. This sort of KO is versatile but a bit tricky to pop just the 1/2 inch slug. One KO is on each of the two ends and two more, side-by-side, on the back. It has four mounting-holes on the back that suit #10 screws. NFPA only wants 10 AWG but 8 AWG could easily be used as there is ample space in the box. The connector used in mine is a Cooper (Eaton/Arrow-Hart) brand, it looks pretty sturdy and holds wire very well. This is probably an AHL1430FI assembly and so it too supports up to 8 AWG. The connector comes grounded, through 10 AWG stranded, to a stud in the box. The connector assembly may be withdrawn and wired by removing its three securing screws.Potential Risks: Supplied with zinc-plated screws securing the cover and plug but they should serve many years even if they rust a bit. The material supporting the plug does not seem quite as sturdy as the plug but, at room temperature at least, seems adequate; I doubt there will be any issue. The knock-outs are not water-tight, there are gaps, but this is probably not an issue. The pop-rivets are not of the closed-end type though I doubt this will be an issue either.My install: I fitted my basement-mounted load-center with a special Cutler-Hammer/Eaton cover. This new cover includes a factory, UL-listed, mechanical interlock. Part of this change involved moving the right-hand column of breakers down to allow the installation a 30A, 2-pole HACR breaker. The interlock enforces the choice between public power and the generator feeding this additional breaker. It's wired using red & black stranded THHN, 10 AWG (minimum per NFPA 70), along with a white neutral and green for the ground. Plumbed through 1/2 inch ENT. The obvious and popular choice here would be NM-B 10/3 but ENT was handy. This leads to a 1/2 inch GRC coupler and 1/2 inch GRC close-nipple. This mechanically stronger, UV-stable stub passes through a 1-1/8 inch diameter hole, penetrating the wall and vinyl siding. (consider the siding thermal expansion if you do this!) The nipple enters one knock-out at the back of the inlet-box, secured with a nut and topped with an insulating bushing. The box is mounted using four stainless screws passing through four aluminium spacers, into the house. The spacers keep the box level (parallel with the sheathing) and prevents crushing the siding. The siding was re-sealed using 50-year rated sealant. Ensure that the conduit, or whatever, is clamped to slope toward the exterior wall.Now, when the power goes out in the next ice-storm, I can connect my little generator to keep a few thing going, like the well-pump and boiler.
Mind sharp edges
Solid
Best inlet box available.
I have installed dozens of these boxes for portable gen set hookups. I started out using the plastic boxes but they fade very quickly in the Carolina summer heat. This box is by far the best out there.
Five Stars
A good quality box. I like it better than the plastic ones.
Visit the Generac Store
GENERAC POWER SYSTEMS, INC. Generator Power Inlet Box, Aluminum, 30A
AED1,41247
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
'%3e%3crect%20x='0.599609'%20width='22.4'%20height='16'%20fill='%230A17A7'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M-0.426196%20-1.53223L9.1335%204.91587V-1.06506H14.4668V4.91648L24.0263%20-1.53147L25.2193%200.237148L17.6615%205.33494H23.0002V10.6683H17.6618L25.2187%2015.7655L24.0258%2017.5341L14.4668%2011.0865V17.0683H9.1335V11.0871L-0.425634%2017.5348L-1.61858%2015.7662L5.93947%2010.6683H0.600172V5.33494H5.93977L-1.61914%200.236387L-0.426196%20-1.53223Z'%20fill='white'/%3e%3cpath%20d='M15.5332%205.06615L25.6655%20-1.59961'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M16.6094%2010.9578L25.6924%2017.0801'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M7.00176%205.04727L-2.47266%20-1.33789'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M8.02936%2010.8842L-2.47266%2017.8486'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M0.599609%209.6H10.1996V16H13.3996V9.6H22.9996V6.4H13.3996V0H10.1996V6.4H0.599609V9.6Z'%20fill='%23E6273E'/%3e%3c/g%3e%3c/svg%3e)
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
More from this brand
Similar items from “Generators”
Share with
Or share with link
https://www.bolo.ae/products/KO009GAGIRN
Visit the Generac Store
GENERAC POWER SYSTEMS, INC. Generator Power Inlet Box, Aluminum, 30A
AED1,41247
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United Kingdom
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
BOLO is not an authorized or official retailer for most brands, nor are we affiliated with manufacturers unless specifically stated on a product page. Instead, we source verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, images, descriptions, and reviews originate from the manufacturer or from trusted sellers overseas. BOLO is not affiliated with, endorsed by, or an authorized retailer for most brands listed on our website unless stated otherwise.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of United Arab Emirates. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in United Arab Emirates are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Reviews:
Works good
Easy to install, I already had the transfer panel and just needed a way to plug in the generator without any hassle. Works great!
A Very Nice part
This is NEMA 3R for outdoor use and one of the few I have seen that the environmental resistance is apparently maintained while connected to the generator. That's important for my home since inclement weather accompanies nearly every outage. This inlet box is the same that has been marketed as a GenTran (now owned by Generac) p/n 14302. It's UL Listed and made of heavy aluminium. It has concentric knock-outs which support 1/2, 3/4 and 1 inch trade-size. This sort of KO is versatile but a bit tricky to pop just the 1/2 inch slug. One KO is on each of the two ends and two more, side-by-side, on the back. It has four mounting-holes on the back that suit #10 screws. NFPA only wants 10 AWG but 8 AWG could easily be used as there is ample space in the box. The connector used in mine is a Cooper (Eaton/Arrow-Hart) brand, it looks pretty sturdy and holds wire very well. This is probably an AHL1430FI assembly and so it too supports up to 8 AWG. The connector comes grounded, through 10 AWG stranded, to a stud in the box. The connector assembly may be withdrawn and wired by removing its three securing screws.Potential Risks: Supplied with zinc-plated screws securing the cover and plug but they should serve many years even if they rust a bit. The material supporting the plug does not seem quite as sturdy as the plug but, at room temperature at least, seems adequate; I doubt there will be any issue. The knock-outs are not water-tight, there are gaps, but this is probably not an issue. The pop-rivets are not of the closed-end type though I doubt this will be an issue either.My install: I fitted my basement-mounted load-center with a special Cutler-Hammer/Eaton cover. This new cover includes a factory, UL-listed, mechanical interlock. Part of this change involved moving the right-hand column of breakers down to allow the installation a 30A, 2-pole HACR breaker. The interlock enforces the choice between public power and the generator feeding this additional breaker. It's wired using red & black stranded THHN, 10 AWG (minimum per NFPA 70), along with a white neutral and green for the ground. Plumbed through 1/2 inch ENT. The obvious and popular choice here would be NM-B 10/3 but ENT was handy. This leads to a 1/2 inch GRC coupler and 1/2 inch GRC close-nipple. This mechanically stronger, UV-stable stub passes through a 1-1/8 inch diameter hole, penetrating the wall and vinyl siding. (consider the siding thermal expansion if you do this!) The nipple enters one knock-out at the back of the inlet-box, secured with a nut and topped with an insulating bushing. The box is mounted using four stainless screws passing through four aluminium spacers, into the house. The spacers keep the box level (parallel with the sheathing) and prevents crushing the siding. The siding was re-sealed using 50-year rated sealant. Ensure that the conduit, or whatever, is clamped to slope toward the exterior wall.Now, when the power goes out in the next ice-storm, I can connect my little generator to keep a few thing going, like the well-pump and boiler.
Mind sharp edges
Solid
Best inlet box available.
I have installed dozens of these boxes for portable gen set hookups. I started out using the plastic boxes but they fade very quickly in the Carolina summer heat. This box is by far the best out there.
Five Stars
A good quality box. I like it better than the plastic ones.
More from this brand
Similar items from “Generators”
Share with
Or share with link
https://www.bolo.ae/products/KO009GAGIRN